Neutral Bactericides for Cooling Water
Time:2025-06-18Page views:136

1. Product Description

Neutral pH suitability, for microbial control of cooling water, does not contain strong oxidizing components and avoids chemical damage to cooling water systems.

Broad Spectrum Bactericidal Efficacy, good significant inhibitory effect on bacteria, fungi and algae, especially for the rapid action mechanism of slime mold and sulfate-reducing bacteria in the industrial water system, and the sterilization rate can reach more than 99% in 30 minutes.

2.Specifications and Parameters

Appearance: colorless to light yellow transparent liquid

Density (20℃): ≥0.98 g/cm3

3.Customized service

This product can provide different specifications and parameters according to user requirements, customized packaging, labeling, logistics services.

4.Usage and Dosage

Used for circulating cooling water system maintenance

Monthly impact dosage: 200ppm cycle for 1 hour, followed by flushing and discharge;

Used in conjunction with SCQF-806/807 cleaner can enhance the effect of biofilm removal.

5.Packaging and Storage

25kg polyethylene special plastic drums, stored indoors (25 ℃) in a cool ventilated place, storage period of 12 months.

6.Safety Protection

When operating, you should carefully read the precautions labeled on the barrel and properly wear safety protection equipment, including rubber gloves and goggles, etc. Avoid contact with skin, eyes, etc. If contacted inadvertently, you need to immediately wash with large amounts of flowing clean water.

For information on the safety, transportation and emergency handling of Shuichangqing products, please refer to the MSDS.

循环水中性杀菌剂-1.jpg